钢铁企业日际煤气最优混合配比的算法研究

钢铁企业根据日际生产计划,可以确定日际生产的副产煤气总体积、各煤气消耗设备的热量需求。为进一步确定各设备消耗的混合煤气中的煤气配比,使煤气产耗平衡,提出混合煤气逆向分解方法,将各设备消耗的混合煤气中所包含的单一煤气成分体积,表示为各设备获得热量与混合煤气热值的函数,在此基础上建立日际煤气最优混合配比算法模型。该模型以各设备的混合煤气热值及热量作为决策变量,以各煤气消耗设备的热量偏差最小为目标,综合考虑各煤气设备的热值要求、自备电厂的热值、热量要求及煤气体积守恒等约束条件。采用遗传算法求解,并利用遗传算法基因初始化的范围区间控制混合煤气的热值范围。算例结果表明:建立的日际煤气最优混合配比算法模型,在优化煤气分配的同时,显著减少了约束方程及决策变量的数量,为钢铁企业日际煤气平衡调度提供了理论支撑。     

Economic effects of regulating the seismic strengthening of older buildings

The marked increase in the awareness of earthquake risk following the Canterbury earthquakes in New Zealand offered a unique opportunity to investigate the economic effect of disaster-mitigation regulations on the commercial building stock. A difference-in-differences (DD) framework was used to determine whether earthquake risk has been capitalized into the property prices of buildings constructed prior to 1976, as a response to the national policy requiring assessment and strengthening (or demolition) of the existing earthquake-prone building stock. A negative externality is found in the policy announcement on affected (pre-1970s) office and retail buildings which caused office buildings to suffer a 12.5% stigma discount. However, retail properties were less impacted suffering a 2.3% stigma loss. The value of the commercial building stock has been affected by the policy. These findings provide policy-makers with timely evidence as to the economic effects of New Zealand’s earthquake-prone buildings policy. Facing losses in property value and financial responsibility for retrofitting their assets, building owners will be looking for a workable set of regulatory and non-regulatory incentives to encourage disaster risk management and protect the built environment.     

Deciphering the Origins of P1-Induced Power Losses in Cu(Inx,Ga1–x)Se2 (CIGS) Modules Through Hyperspectral Luminescence

In this report, we show that hyperspectral high-resolution photoluminescence mapping is a powerful tool for the selection and optimization of the laser ablation processes used for the patterning interconnections of subcells on Cu(In_x,Ga_1−x)Se₂ (CIGS) modules. In this way, we show that in-depth monitoring of material degradation in the vicinity of the ablation region and the identification of the underlying mechanisms can be accomplished. Specifically, by analyzing the standard P1 patterning line ablated before the CIGS deposition, we reveal an anomalous emission-quenching effect that follows the edge of the molybdenum groove underneath. We further rationalize the origins of this effect by comparing the topography of the P1 edge through a scanning electron microscope (SEM) cross-section, where a reduction of the photoemission cannot be explained by a thickness variation. We also investigate the laser-induced damage on P1 patterning lines performed after the deposition of CIGS. We then document, for the first time, the existence of a short-range damaged area, which is independent of the application of an optical aperture on the laser path. Our findings pave the way for a better understanding of P1-induced power losses and introduce new insights into the improvement of current strategies for industry-relevant module interconnection schemes.     

甲基氯硅烷精馏流程的模拟与优化

采用Aspen plus软件对工业七塔精馏过程进行全流程建模与模拟，优化工艺参数，研究了新的精馏节能工艺。对一甲塔等7个精馏塔采用双因素水平的灵敏度分析，考察了塔釜采出率、回流比、进料位置和塔顶压力对产品浓度和热负荷的影响，确定一甲塔最优的工艺参数：塔釜摩尔采出率为0.92，摩尔回流比为130，塔顶压力为0.18 MPa，总理论板数为400，在210块理论板位置进料。在此基础上，针对高能耗的脱高塔/脱低塔，模拟研究了双效精馏新工艺，新工艺可节省39.70%的年总成本；针对一甲塔模拟研究了热泵精馏新工艺，新工艺可降低41.42%的年总成本。     

内插螺旋立式上行管流场及传热性能的实验研究

通过粒子图像测速流场实验与传热实验相结合，研究了内插螺旋立式上行管的螺旋节距、丝径、中径比等结构参数在不同Re下对流场、阻力及传热性能的影响。结果表明，内插螺旋能够有效扰动和混合管内流体，使管内形成多个纵向旋涡的流体结构、增大管壁附近液体涡量，有利于强化传热。当Re相同时，管内平均流速v、Nu和综合换热性能PEC均随丝径增大而增大，随中径比减小而增大；随节距增大，3种参数均出现增大的趋势，节距大于20 mm后开始减小。管内流体的阻力f随丝径和节距增大而减小，随中径比增大而增大。综合比较，在较低Re时，节距p=20 mm、丝径e=1.6 mm、中径比D/d=0.75时综合传热效果最好。     

抗冲ACR树脂的合成及其性能评价

采用种子乳液聚合法,以丙烯酸丁酯为核层单体、甲基丙烯酸甲酯为壳层单体、甲基丙烯酸烯丙酯为交联剂制备了抗冲ACR树脂。考察了不同加料方式对ACR乳液粒径及对PVC冲击性能的影响,结果表明:连续滴加方式可实现乳液粒径的稳定控制,并能得到性能优异的抗冲ACR树脂。     

API X52管线钢与Corus RQT 701超高强钢的焊接工艺

针对超高强钢在机械行业的广泛使用,焊接接头易出现淬硬脆化、裂纹等缺陷的情况,采用焊条电弧焊(SMAW)和药芯气体保护焊(FCAW-GS)组合的焊接方法,对API X52管线钢与Corus RQT 701超高强钢的焊接进行了工艺试验,并进行常规力学性能试验。结果表明,通过合理匹配焊接工艺参数,严格控制低热输入量及层间温度,实现了小熔合比的异种钢焊接,且焊接接头具有良好的力学性能,达到了标准和规格书的要求;异种高强钢焊接,采用SMAW打底焊接和FCAWGS填充并盖面的方法,焊接效率较单纯采用焊条电弧焊工艺提高2倍以上。     

Ethanol absorption from CO2 using solutions of glycerol and glycols

CO₂ stripping during fermentation is a possible way of increasing the production of ethanol in distilleries. Ethanol, water, and carbon dioxide are the main compounds in the exiting gas mixture. To date, few studies have proposed the use of absorption to recover ethanol from this mixture or have considered different absorbents for this purpose. This work evaluates different absorbent solutions used to recover ethanol vapor from CO₂ gas. Glycols and glycerol can provide easier separation of ethanol than water, with lower distillation energy demand. A statistical experimental design was used to compare the mass transfers of ethanol from the gas phase to the liquid phase, using solutions of glycerol, ethylene glycol, and diethylene glycol. High concentrations of these substances did not favor the absorption of ethanol. The best results were achieved with 25% absorbent solutions, which offered better options than water for the recovery of ethanol from CO₂ gas in absorption columns and could increase the productivity of first generation bioethanol production.